Multiparameter Air Quality Monitor – XPS

Enquire for Pricing

The XPS Environmental Monitoring System includes PM2.5 and PM10 as standard, along with your choice of up to five additional gas sensors.

Description

Overview of the XPS

The XPS base setup monitors PM2.5 and PM10 particles in the air, with over 15 additional sensors available, and it can be customised to suit your needs. The XPS connects via 3G/4G or LTE to real-time sensor data from the device, updated every minute, making it easy to secure online dashboards.

Featuring a built-in LCD screen for instant in-field feedback. No need to call head office to check if it’s working yet. Deployable by a single person in the field. Set up monitor and tripod in 5 minutes, and complete solar setup in under 15 minutes.

Specifications

XPS Multiparameter Air Quality Monitor Specifications:

Power Supply	12 or 24 VDC
Rated Power	12 Watts
Operating Temperature	0^oC to 50^oC
Operating Humidity	0-95% non-condensing

Particle Size Range	PM1.0, PM2.5, PM4.25, PM10 & TSP
Size categorisation (Standard)	0.35 to 40 um (RI of 1.5 +io) at 24 software bins
Sample flow rate	1.2L/min nominal
Max particle count rate	10,000 count/sec
Detection Limit	1 ug/m3
Detection range	0 – 30000 ug/m3
Sampling frequency	1 seconds
Particle density value	1.65 g/ml

Gas	Range	Resolution	T90 (s)
CO	0-1000 ppm	1	<25
H2S	0-200 ppm	1	<55
O2	0-25% Vol	0.1	<13
CO2	0 – 5% Vol	10	<40
NO2	0 20 ppm	0.1	<60
NO	0-20 ppm	1	<25
SO2	0-100 ppm	1	<60
LEL	0-100% LEL	1	<12
VOC	0-1000 ppm	1	<30

Parameter	Range	Resolution	Accuracy
Wind Speed	0-60 m/s	0.01 m/s	+0.3m/s
Direction	0-360^o	0.1 ^o	+2^o
Temperature	-40 to 60 ^oC	0.01 ^oC	+0.3 ^oC
Humidity	0-100% RH	0.01%	+3% RH
Pressure	300 – 1100 hPa	0.1 hPa	+0.5 hPa
Globe Temperature	0 – 60 ^oC	0.1 ^o	+2^o

Range	30-130 dB (A)
Resolution	0.1 dB
Sensitivity	12.6mV/Pa
Microphone	1/2 Inch
Directivity	Omnibearing

Connectivity
SCADA Integration	MODBUS TCP/IP, MODBUS – RTU
Upload	Cellular, WiFi and Ethernet
Upload Protocol	FTP, MQTT, MQTTs